Planning your Programming
Print

 

1F80, CLASSIC 80 SERIES INFORMATION Planning Your Program, 5+2 Day Thermostat (1F80, 1F81, 1F82)

If you have already determined your programming needs, for instructions on entering your program, go to programming your thermostat.

This section will help you plan your thermostat's program to meet your needs. For maximum comfort and efficiency, keep the following guidelines in mind when planning your program.

  • When heating (cooling) your building, program the temperatures to be cooler (warmer) when the building is vacant or during periods of low activity.
  • During early morning hours, the need for cooling is usually minimal.
  • Program the thermostat to allow about 30 minutes to reach the desired temperature. (For example, if the first person gets up at 6:00 AM, program the first period to begin at 5:30 AM.)

Look at the factory pre-programmed times and temperatures shown below. If this program will suit your needs, simply press the RUN PRGM button to begin running the factory preset program.

FACTORY PREPROGRAMMING
Heating Program for
All Days of the Week
Cooling Program for
All Days of the Week
PERIOD TIME TEMP PERIOD TIME TEMP
1st 6:00 AM 68°F 1st 6:00 AM 78°F
2nd 8:00 AM 68°F 2nd 8:00 AM 82°F
3rd 5:00 PM 68°F 3rd 5:00 PM 78°F
4th 10:00 PM 64°F 4th 10:00 PM 78°F

If you want to change the pre-programmed times and temperatures, follow these steps.

Determine the time periods and heating and cooling temperatures for your weekday and weekend programs. You must program four periods for both the weekday and weekend program. However, you may use the same heating and cooling temperatures for consecutive time periods. You can choose start times, heating temperatures, and cooling temperatures independently for both weekday and weekend programs (for example, you may select 5:00 AM and 70° as the weekday 1st period heating start time and temperature, and also choose 7:00 AM and 76° as the weekday 1st period cooling start time and temperature).

Use the table below to plan your program time periods, and the temperatures you want during each period. You may also want to look at the sample program table to get an idea of how the thermostat can be programmed. If you have Acrobat Reader on your computer,  you can view and print out a copy of these tables.

Heating/Cooling Schedule Plan
Period WEEKDAY (5 DAY) WEEKEND (2 DAY)
Start
Time
Temperature Start
Time
Temperature
1st Heat



2nd Heat



3rd Heat



4th Heat



1st Cool



2nd Cool



3rd Cool



4th Cool



 

Sample
Heating/Cooling Schedule Plan
Period WEEKDAY (5 DAY) WEEKEND (2 DAY)
Start
Time
Temperature Start
Time
Temperature
1st Heat 5:30 AM 68°F 7:00 AM 68°F
2nd Heat 8:00AM 65°F 11:00 AM 70°F
3rd Heat 5:00 PM 70°F 6:00 PM 70°F
4th Heat 10:30 PM 65°F 11:30 PM 65°F
1st Cool 6:30 AM 76°F 7:00 AM 76°F
2nd Cool 2:00PM 78°F 12:30 AM 74°F
3rd Cool 5:00 PM 72°F 6:00 PM 72°F
4th Cool 10:30 PM 78°F 11:30 PM 78°F

Now that you have determined the programming for your thermostat, for instructions on entering your program, go to programming your thermostat.